Vocal and instrument processors

Radial JD7 - Active class-A guitar distro system, 2-in, 7-out & re-amping. PSU included

Product Code: RA-JD7

Brand
Radial Engineering
RRP $2,949.00
*Recommended Retail Price may not be a true representation of the market price
 
Quantity In Cart:  
Unit of Measure
EACH

 

Unspecified
False False
Technical Specifications
Brands Radial Engineering
Product type Switchers
  • Details
  • Downloads
  • Where to Buy
  • Ordering
  • Specifications

Studio Guitar Distribution and Splitting

The JD7™ is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time without introducing noise, signal loss, or hum and buzz from ground loops.

  • Drive up to 7 amplifiers and 2 effects loops at the same time
  • Jensen transformer isolation eliminates hum and buzz
  • Built-in Radial Direct box and Reamp capabilities
  • Drag control load correction for natural tone

Natural tone, quiet operation

The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.

Record direct and Reamp through multiple amps

The JD7 has a built-in Radial DI box, so you can take a clean guitar track directly to your recording interface while simultaneously playing through multiple amplifiers. A Reamp input allows you to send your recorded guitar track from your recording device back through any or all of your amps, so you can focus on the performance and have the freedom to tweak your amps and microphones later on.

JD7 Applications

Using the JD7 as a splitter

The JD7 is equipped with A or B inputs and 6 guitar outs on the front panel plus a tuner out on the rear. Use ch-1 with a properly grounded amp, then add as many as you like. All outputs are isolated to eliminate hum and buzz.

Using the JD7 for Reamping

Start by recording a dry track using the JD7's DI output. Then send the clean track back to the Radial JD7's rear panel XLR input. Adjust the level and you are now set to drive as many amps as you need. Move the mics, change the tone settings.

Using the JD7 with effects

A great way to quiet down noisy guitars is to run all your signals through the JD7. The high performance class-A buffers and Jensen transformer isolated outputs are truly amazing! Channels 5 and 6 are also equipped with effects loops.

Videos

  • Tech Corner - Reamp 101

Reviews

Artists

Product Documents

No documents available

Ordering from Amber Technology

Logging in

New to Amber Technology?

You can place an order using guest checkout, and we’ll email your order details when we ship.

You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We’ll never share your registration details outside Amber Technology.

Are you an Amber Technology account customer?

Your user id is the email address that’s recorded for your account. If you don’t know or have forgotten your password, please reset it using this link.

If you need help with any login or site-related issues, please contact us here.

Shipping

Orders placed though the Amber Technology website are despatched from our Sydney warehouse. Orders placed before 1.00pm Sydney time (for items in stock) will generally be shipped on the same day. 

We ship using Startrack Express. We deliver Australia-wide to residential, business and PO box addresses.

Shipping is free for all orders over $275 including GST (effective 1 March 2018). There is a $22 (including GST) shipping and handling charge for all orders under $275 including GST. 

Tracking

You can track your shipment through the web sites of our couriers:

Star Track Express 

Tracking numbers for your order can be found in the order history section of your dashboard. If you have any questions regarding shipping, please contact us.

Warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site.

Refurbished items will include a 12 month warranty unless otherwise stated.

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us. 

Amber Technology maintains a nation-wide network of carefully selected Authorised Service Agents to ensure that you are never far from convenient, expert technical and service support. If your item develops a problem and requires servicing under warranty, please contact your local Authorised Service Agent.

Stock Availability

The availability of stock is communicated via the indicator of each product listing page. "Available" means that reasonable stock is in our warehouse, ready for immediate shipment. "Limited Stock" means that we have only a small number of items in stock. "Out of Stock" means this item is currently unavailable for immediate shipment - orders placed for ‘Out of Stock’ items will be fulfilled as soon as replacement stock arrives.

"Special Order” items are products that are not generally kept in stock in Australia. Lead times for Special Order items vary depending on country of origin, manufacturer’s stock levels, factory production schedules and/or incoming shipment transit times. Please contact us for an estimate as to the likely lead time. Please note that finalized sales for special order items cannot be cancelled.

Refurbished items

If refurbished stock is available, this will be shown on the summary page for the product. If a product listing only allows you to choose refurbished stock, we are not holding new stock and we can no longer obtain new stock.

Refurbished items are always in perfect working order and will include all accessories. Refurbished items are may

  • have a damaged carton
  • have been used for demonstrations
  • have been repaired
  • have minor imperfections that do not impact performance.

Refurbished items include a 12-Month warranty unless otherwise stated.

Technical Support

Please visit the Get Support page to find a service agent, log a service ticket, or ask a technical question about your product.

Returns

Please contact us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.